Waterco Home
 
SHARE:

Aqua~Health Supa-Floc Plus

Aqua~Health Supafloc Plus is a heavy-duty and fast-acting flocculant.  It is formulated from a unique blend of our liquid floc combined with a concentrated polymer resin. It will settle debris and organic matter on the pool floor within 3 to 6 hours to be vacuumed to waste.

Sign Up for Waterco Newsletter

Highly Efficient

Combining the heavy-duty liquid floc with the concentrated polymer resin enables it to provide outstanding results in a matter of hours.

 

Main Features

  • Easy to use
  • Work in less than 12 hours
  • Clear the cloudiest of pools in under 6 hours
  • Remove dead algae and other floating particles
  • Compatible with all types of sanitisers

 

Where can it be used?

It may be used in all types of pool finishes. 

 

Dosage Rate:

1L per every 50,000L

 

How is it used?

  1. Adjust pH to between 7.5 and 7.8.
  2. Set the filter to by-pass or re-circulate or remove filter grids where the type of filter necessitates doing so.
  3. Add the recommended dose.
  4. Run the filter on re-circulate for a short period, then turn off to allow water to settle and debris to drop.
  5. After the debris has dropped to the bottom of the pool, vacuum it to waste.

 

What is the main difference between a clarifier and a flocculent?

A clarifier is designed to be used with a filtration system with particles coagulating in the filter. In contrast, a flocculent is not used with the filtration system as the filter will clog.

 

Aqua~Health Supafloc Plus in Salt Water Pools

In salt pools, where the water contains concentrations of positively charged ions, the overall floc size is reduced, resulting in a lighter appearance and intensity floc.

We have allowed for this factor with our unique polymer resin, enabling Aqua~Health Supafloc Plus to work equally effectively in salt pools and other types of pools.

 

Aqua~Health Supafloc in the Service Van  

Aqua~Health Supafloc is an ideal addition to your service van. Complete treatment can usually be performed in one day or less. In addition, it saves going back to the pool the following day as is necessary with other flocs that take 24 hours to work.

 

Available Pack Sizes

  • 1 litre bottle
  • 20 litres drum featuring original manufacturer brand

 

How to get the most from Aqua~Health Supa-Floc Plus

  1. If the pH is too low – it needs to be adjusted between 7.5 and 8.0.
  2. TDS below 1500ppm (for non-salt/mineral  pools).
  3. If you have live algae perform a green pool or algae treatment before using Aqua~Health Supafloc Plus.
  4. MORE IS NOT BETTER

Related Products